Friday, June 20, 2008

Analyzing and Altering The Fitting Muslin, part 2, LisaC


Edit to add: I just talked with Lisa about the fit.
Upon looking more closely at the top of the coat, I figured out that the grain lines were lifting on the sideview picture because the whole coat was sliding back on her.
So, I looked again at the pics, and realized that I'm looking at seam allowances on the neckline (see picture above).
The princess seams are set too far apart, the neckline is a good 1" to 1.25" off her neck, and the shoulders are too wide.
IOW, it's too big.
I referred Lisa to Nancy Zieman's fitting guide from Fitting Finesse
and talked to her about how to proceed from here.
We concluded that Lisa probably cut a size that is too large for her.

When choosing your size, it's always easier to adjust the fitting elements below the neckline, shoulders and bust - so choose your pattern to fit your top.


Lisa was, I believe, the first to put up a fitting muslin for analysis.

She made the changes I suggested intially, then took the set of pictures you see on the bottom row of the collage.
This is a copy of the email I just sent her:
Hi Lisa,
I've been a bit baffled over what is going on with your muslin, and just had a bit of a lightbulb moment.

The weight of the coating wool will serve to hold down the fullness in that skirt (and I think you're going to want to add weights anyway) - however, your muslin has no weight to it.
Humor me, and stitch closed a little pocket in the bottom of each of your princess and side seams in your muslin at the hemline, and insert a penny into each pocket. Now the seams should be pulled by gravity to be straight vertically.
If there is something going on that you are going to need to adjust, you'll get big fat diagonal drag lines now. If not - you'll just have nice full swooshes of skirt.
I think what's happening on the side seam and the side fronts and backs might just be that the muslin wants to stick out without benefit of weight to hold it down.
At least if it's weighted we'll be able to see where the changes need to happen.

Thanks, Marji

Lisa also mentions seeing drag lines on her back in the second set of pictures, but I'm not seeing them. I do however think that the princess seams on the back at the waistline might benefit from letting out just a bit more.

EJVC options presented by Marji


Just a couple of quick options off the top of my head.
The Marfy F1005 has the waist in the right place,
The Butterick has the back pleat and several neckline options, but you would want to drop that waistline significantly. That really high waist is going to serve to emphasize the bustline.
The pockets and the back pleat are easy design elements to add. The double breasted is going to be more challenging because it involves redesigning the collar
I added line drawings of a current McCalls, and the ever present favorite in my collection, Vogue 7978. If you were to use one of those, and chop the pattern apart at the waistline - the skirt part of the coat you're looking at would be fairly easy to emulate.

To get a raglan sleeve I believe you're going to need to look at Patrones or Burda - there aren't many raglan patterns out there right now, and what there are are generally the totally not fitted oversize jackets.

If you were willing to go with a set in sleeve, I think that there are several options above that would work well.

Elizabeth: Has anybody seen this in a pattern?


Hi,

I'm off today to buy muslin to begin to meet Marji's deadline. I have been late because I haven't found the exact pattern I wanted. I think I have settled on Burda 10/2007-111, although I'll need to make it smaller

However, surfing on net-a-porter I came upon this gem from Pringle of Scotland. It's a double-breasted coat with raglan sleeves. If you go to http://www.net-a-porter.com/product/35277 you can see all the lovely details - taping on the waist and sleeve seams and on the pocket edges, huge pockets, and what I take to be the backs of snaps on the invisible 4 buttons of the eight. It also has a beautiful pleat at the back (see second picture).

What I want to ask is, does anyone know a pattern with these basic bones? Otherwise perhaps (!) I could add some of these features to my coat. Have I mentioned I love this coat?

Thursday, June 19, 2008

Summerset: Fitting #1 for Vogue 2873

I will be making Vogue 2873 in a size 10 so, I cut out and sewed this muslin up exactly as the pattern is, resisting the urge to make my usual petite adjustments at the waist and on the sleeves. I am wearing the muslin over a red sweater, which is typical of the sweaters I'd be wearing the coat over in the winter. I did trim the seam allowance off the of the front edge, lapel and collar. I didn't stitch and turn under the seam allowance at the armscye (sorry Marji!). First, the line drawing, if you're not familiar with this pattern (it's the Michael Kors one, with the model's version done in purple wool):

Here's my version, without sleeves; front, back, side:



I also tried one of the shoulder pads in the armhole to see if it would fit:

I then made up a sleeve, inserted it and the shoulder pad and ended up with these results:


Overall, it isn't too, too bad. I know I will need to make the following adjustments, at the very least:

  • Shorten the length between shoulder and waist by about 2" to get the waist in the right place. I like the original length, so I will add the length back at the hem to keep the hem where it is.
  • Shorten the sleeves by about 1", maybe a little more. I intend to take some of this amount out of the sleeves and some out of the cuff. The reason for this is that the cuffs seam a bit deep and out of proportion for my overall size. I'm a petite, and I have to watch the proportions.
  • Make the collar and lapel a bit smaller, again due to my size and overall proportions.
  • Possible back armhole/shoulder slope adjustment. There is a wrinkle back there that was worse after I put in the sleeve. I've seen the same wrinkle on other muslins that I've made.
Design-wise, you'll notice that I left off the flaps for the faux welt pockets. I am going to be using inseam pockets on the side seams instead. There are three reasons for this: I must have usable pockets, I'm short waisted so having those two flaps on the front is overkill for me, and I'm using a wool plaid fabric, which speaks for itself without any need of extra design detail.

I'll be working on this a little bit over the next week and by the end of next week, should have all the pattern adjustments made. I'll also try to get my fabric pretreated, and buy and treat the underlining and lining, too.

Wednesday, June 18, 2008

Analyzing and Altering The Fitting Muslin

Today I want to pick apart and analyze the fit on the first few muslins that have been presented for fitting analysis.

Note: I've gotten individual permission from each participant to use their pics and draw all over them and use them as examples. I will not be doing this for every fitting muslin presented. This is to be an example of what to look at and look for in your own fitting muslin, and how to look at subsequent muslins presented here in order to adjust for a great fit. It's what distinguishes custom clothes from those off the rack—the fit.

First up: Melissa's Muslin

click on pic to make it larger



Anatomically, your waist is that indent just below your rib cage and just above the hip bone.
Your anatomical waist (not where you wear your pants), may be about 1" or 2.5cm above your belly button.

Making changes one at a time, I would first suggest:
  1. You need to adjust your bodice length. The "waist" on this pattern is well below your waistline, as drawn on the photo above.
  2. To gain more ease since this is too close-fitting, let out some in the princess seams, evenly, from upper chest to hem, front and back. I would start stitching at the hem, moving out .6cm (1/4") from your current seam, all the way up, tapering to nothing just before the armscye in the back and to nothing at the upper chest in the front. Even in the picture where you're standing straight, before you try to lift your arm, you've got all sorts of pulling across the chest.
  3. Next, you don't have room for a shoulder pad, so you need to open up the stitching at the top of the sleeve cap for about 2.5cm (1") on either side of the shoulder seam, then…
  4. Change the angle of stitching across the shoulder seam, tapering from nothing at the neck edge to between 3/8" and 1/2" at armscye edge, which will give you from 3/4" to 1" allowance which is room for the shoulder pad.
  5. Now, you've made the armscye larger by the amount of your alteration at the shoulder. You need to make a corresponding change on the sleeve cap. Take your scissors and split the sleeve vertically shoulder to hem. This is muslin, you can split it and insert a piece underneath. You already know you're going to add girth to the sleeve. In the book you've looked at they have you split it vertically leaving a hinge at top and bottom and then pull it open, correct? Well, you'll be doing the same, except you won't be hinge-ing the top because you need to open it anyway. At the sleeve cap you only want to add the amount you'll need to match the amount you added at the shoulder. From there on down, you'll need to decide how much you want to add to the width of the sleeve, and if you want to make the split go all the way through the wrist or not. See Els' diagram below to get a better understanding of the sleeve cap alteration.
  6. Measure the depth of your sleeve cap, per Els' diagram. If your armscye is either too high OR too low you'll get pulling when you try to lift your arm.
Photo and directions courtesy of Els.


Next Up: Lisette M's Muslin
click on pic to make it larger

Same issue—if that bib is supposed to end at the waist, this pattern is drafted with one long, long torso person in mind.

White line indicates the actual front closure line as it is now. It needs to be brought to parallel with the blue line I've drawn.

I've looked and looked at Lisette's pics. At first I thought maybe she had a high hip, but then I downloaded the pics and drew on them—and it's pretty clear she doesn't. What she does have is a body type that is sometimes referred to as "flattened oval-shaped torso"—in other words, wider than thick. This is as opposed to a body type that is Cylindrical-shaped torso—which may be characterized by large prominent bust and/or belly and/or buttocks.

What you're seeing in the pictures, that is really evident when I draw the lines, are rising lines at the (low) waist and hip from the Center Front rising out toward the side seams, and this gets even more pronounced at the hem. (You'll have to click on the pictures to see them full size or else this isn't evident at all.)

My recommendations:
  1. Raise that waist line so that it's where it should be. I'm really thinking this is a pattern drafting error since both of you on the same pattern have the same issue and neither of you are short waisted.
  2. Let out the side front princess seams just a hair.
  3. Take a fisheye dart from the CF to the side seam. Since this is a double-breasted coat, you do not want to continue the angle of the fisheye past the CF—you want to straighten it out.
  4. Your back neck appears to be climbing up past the top of your spine, onto your neck. Do you know how to do this adjustment?
  5. Your vertical lines on the back are absolutely right on.
  6. I think NancyK may be right in that you may need a forward shoulder adjustment. It's so hard to tell, unless someone stands on a ladder above you, and truly it's easier for you to determine if the seamline originates at your neck edge just under the back of your ear, and ends at your shoulder bone. If you do need this - (good eye NancyK), then go look at the adjustments I made to my muslin. I needed to bring my shoulder forward too, before I opened it up for shoulder pad. You've got plenty of room for shoulder pad here - you dont need to do the second part of what I did. ... oh, and this is the adjustment you want to make 1st, right along with the length at the waist adjustment, before you start making your fisheye darts at the waist and hem.

I think that the combo of opening up that princess seam just a bit above the waist, then the two fisheye darts, will bring the closure on the double breasted part parallel to CF and straighten out the hem lines. Once you get all that done, then put in your sleeves and update your fitting post. Then send me an email that it's been updated. Thanks.

information from the comments that may be of general interest:
Marji writes:
KayY, Thank you for the clarification on exactly where that bib front ends in relation to the waistline marking. It's still long on both of these coats, but it does help to know that it's supposed to be 2.5cm (1") below natural waist, and it's bourne out in the drawing I did across the markings and bib on Melissa's coat.
Melissa, since we're going to be thread tracing seam lines and the hem line, you can go ahead and cut your muslin at your desired finished length, and we'll add hem allowance when laying out and cutting. In any case, for a straight coat like this, Lisette is right, you can add your length at the hemline.
Lisette, before you adjust the back neck, you need to try it on and actually check where that seamline is in relation to the join of your neck and your spine. The alteration, if you need to make one, is the opposite of the alteration for dowagers hump.
So you'll need help, because you need a precise measurement on how high up your neck the seamline is, and you can't get that yourself, while wearing it.
On curved seams where a corresponding piece will be added, in this case a collar, I like to use slash-and-spread or tuck methods to alter, so that you don't change the curve of the seamline (neck edge) at all.
See this at Threads for an explanation of altering for "dowagers hump" aka high round neck.

Tuesday, June 17, 2008

Lindsay T: First Attempt at My Muslin

I'm making Vogue 7978, the view with the stand-up collar, out of bouclé.

My coat "vision": A lightweight, three-season coat that I can wear into the city and occasionally to work. Will be reminiscent of Chanel and will magically make me look 20 pounds thinner and 10 years younger. Or 10 pounds thinner and 20 years younger. I will probably wear it most often unbuttoned with jeans.

Here is my first draft muslin. It feels like the fit is where I want it to be, but I can't tell from these photos. The front looks a little baggy here but it doesn't feel baggy. You can see that I somehow cut the side panels a couple inches shorter than the other panels. I put on some shoulder pads (underneath the turtleneck) that aren't quite as thick as I'd like them to be, but that's all I had available. My DD gave me an unsolicited "looks good, Mom!" Experts, please weigh in with your opinions. Thanks!



Lisette M's Muslin Burda WOF 9/2005 102

I have completed my muslin with the standard alterations I make: I added to the back waist length and I traced size 38 at the neckline, shoulders and armhole, 40 at the chest and from the waist down a 42( I usually trace a 40 at the hip but because KayY had mentioned not enough ease in this area I decided to go up). I am wearing a sweater underneath, I rarely wear jackets under coats and therefore don't need the extra ease for that.




I measured the ease at the hip and thought I had plenty (46 in) but I forgot this was a double breasted coat and as you can tell from the pictures I have no ease in the hip area.

Without the shoulder pads I thought I would need a forward shoulder adjustment but with the pads I don't think so, what is your opinion?

These pictures are without shoulder pads(as are the two above):



These pictures have a 3/8 inch shoulder pad in:





I did not add walking ease. This alteration was discussed in KayY post but the discussion was not finished. Is it recommended for a double breasted coat?In Power Sewing by Sandra Betzina she does not make this distinction and if it is recommended in this coat pattern to include the wedge in CF up to the neckline would cut right through the "bib" and therefore alter its shape.

I marked the welt pockets which will be covered by tabs but somehow I missed since the two parts (the welt pocket cuts across the seam line) do not match. Burda has you mark the welt according to your size on the side panel and then to join the pattern pieces and extend it to the front. I did that but did not turn out :o

I don't see any other issues in the fit but that is why I joined this great sew-along ...for all the extra eyes to appraise the fit!

After I receive your comments I will add the sleeves and update my entry.

When Ladies Dressed: I'm Impressed

Everybody has been making such great progress!

I just moved two weeks ago and I've been trying to get my house organized and functional. It's left very little time for sewing. It will be a while before I'll be able to work on anything more involved than a simple, quick project. I'll be playing catch up...

Here is the pattern I purchased. I'll be making the view to the left (the houndstooth check). In the meantime, it's interesting and informative to see everybody's progress.




Melissa's muslin and fabric prep

I made my coat muslin over the weekend and a few things were apparent to me in this first fitting. Most apparent is that I need much more ease in upper arm! I'm a textbook BWOF 42, but it doesn't appear like they've added any additional ease in this pattern than they do in their standard shirt/jacket/skirt patterns. So it fits ok if my arms are at my side and I'm only wearing a teeshirt underneath, but as soon as I lift my arms or wear something heavier underneath (as in the below photos), it's obvious that I'll need to increase the circumference at the bicep, and also add about an inch at the sleeve (I like the length as it is, but that's supposed to have the seam allowance in that, too).

Another thing I realised when I tried this on is that the horizontal welt pockets are just NOT going to work for me. They look fine, but I definitely need to be able to shove my hands in my pockets in a winter coat, so I'll be ditching the drafted pockets and using vertical inseam pockets instead.

Here's the photos. Apologies for the lighting - between the reflective zip on the jacket I'm wearing underneath (all of my winter clothes are in storage!) and the distance away my photographer had to stand in order to get the hem in shot, the flash was having some issues picking up all the details (you can click to get a bigger photo, though, or I can email hi-res ones if necessary).

Front view:

Standing like this, I'm pretty happy with the fit. I like the way the collar lays, and I feel I've got enough ease in the waist (and tons in the hip).

But when I raise my arms slightly to mimic putting my hands in the imaginary inseam pockets, my sleeve bicips really tightens up and I get bust draglines between my arm and my bust:

I have a book which shows how to adapt the sleeve pattern to increase the girth, but I have no idea how to correct for this bust pulling. I've never had to do any bust alterations before! Or is it an armscye issue? The sleeveless side seems to fit okay (though I don't have my shoulder pads yet to use here, there's definitely room for them in the shoulder).

The side view:

Everything looks fine to me here, and the sleeve seems to be hanging okay.

And the back view:

Everything looks okay to me here, too. The fabric is hanging on my bum a little, but that's just a friction issue that should go away with some slippery lining fabric underneath.

So to my eyes I think I just need to enlarge and lengthen the sleeve, change the pocket, and do something about the bust-pulling issue.

Last week I also did some draping experiments with my microfleece and wool coating (more on fehrtrade.com) and I'm really happy with the way they behave so I've decided to go with that. I've prewashed the microfleece, and I've cut a swatch of my coating and put that through the washing machine twice now (we don't own a tumble dryer, and we always use the very eco and very gentle soapnuts since our grey water goes straight into the river) with zero shrinkage, so I'm going to put it through a third time and really scrutinise the swatch vs the virgin fabric and take a view as to whether to machine wash the whole lot.

Monday, June 16, 2008

Cidell: Raincoating/Pre-Treating

I posted about this on my blog and Stitcher's Guild, but Marji suggested I post here too on my experience with pre-treating the B*berry raincoating fabric.



Leslie from Loohoo Originals had great results in pre-treating her raincoating from Michael's. I recalled Kathryn testing fabric and it came up softer and easier to ease. So, I took the plunge and washed three pieces (one from Michael's and two from Denver).


Two washed up perfectly. The last piece fell apart in the wash. It separated into two different pieces of fabric. I would NOT recommend washing these at home. I think I just got very lucky with my other two pieces.


The fabric is actually two layers with a waterproof rubberized material sandwiched in between and bonded. Because the two outer layers are cotton, they are more likely to shrink. But, the waterproof stuff inside won't.


So, to be safe, I recommend you just save this one for the dry cleaners.

Sunday, June 15, 2008

Mary OK's Eggplant Coat


Photo on right: Courtesy The McCall Pattern Company. http://www.voguepatterns.com/item/F1022.htm?tab=marfy_patterns/outerwear&page=2


Although I have written about the red trench with python trim, this coat will be my main project for this sew-along.

The fabric is a lightweight eggplant wool melton from Gorgeous Fabrics that drapes beautifully. I think it is a good choice for the Marfy design above, F1022, because it is heavy enough to fall in nice folds but not so heavy that the pleats would be bulky. I don't want to wait for the Marfy pattern to get here from Italy, so I found a Burda pattern (Nov. 2006, style 129, a petite pattern) that I think will work with modifications.


Technical Drawing Courtesy Hubert Burda Media. http://www.burdafashion.com/en/Magazines/Archives/129_Coat_130_Dress_technical_drawing/ 1270777-1463237-1426110-1426117-1426158-1429119.html

The coat has built in pocket flaps, which I eliminated by combining the two side front pieces. I won't use the belt. The back has a center seam and shoulder princess seams, to which I will add extensions for the pleats. I am not sure whether I want to change the single-breasted opening to double-breasted, but I really love the closure on the Marfy. I almost never wear double-breasted styles because I think they make me look wide.

My plan is to test the fit of the Burda in a muslin according to the original style, then test the pleats in a second muslin. I've traced the pattern and am in the process of tracing the pattern pieces onto muslin, with 1" vertical seam allowances, etc. Flat pattern measurements indicated the need to add 1/2" at the bust and shorten the sleeves by one inch, which are typical adjustments for me.

Gry's coat

First, a few words about myself. My name is Gry and I live in Copenhagen, Denmark. I am interested in pattern drafting and have the last three years been taking evening classes in pattern drafting at Københavns Tilskærer Akademi. This was a school of pattern drafting in Copenhagen. Sadly, it closed last month due to lack of pupils. The courses I have taken almost cover the same curriculum as the full-time course, but of course there were a lot less exercises at the evening classes. So I know the theory, but lack experience in pattern drafting. So far I have only made simple designs for trousers and dresses, and this is my first big project based on a home-drafted pattern.

The coat is based on a jacket I saw at H&M last winter. I wanted to buy it, but since we were doing wide raglan sleeves at my evening classes, I thought I might try to do it myself. I made the pattern at classes and adjusted it, but never got as far as to actually make the coat. So when I heard about this sew-along, I thought it was time to take up the coat again.

The design is an A-line coat with wide 3/4 raglan sleeves and vertical intersections. The pattern was based on a well-fitting block, so I mainly did the muslin to work on the design. Overall, I am very satisfied with the coat. The raglan sleeves fit very nicely. Still, there are a lot of details to work with:

  • The collar. Right now, I am most inclined to leave the coat collarless, but I have had about eight different collars up for consideration. A flat Peter Pan-style collar would give the coat a 60's look, a mandarin collar a 50's touch and a funnel neck-style collar a more modern look. I have also thought about more advanced collars. I will probably make a couple of different collars and try them out on the muslin.
  • The intersections. I will try to alter the slope a bit and make the intersections a bit more vertical.
  • Buttons. I like the look with just one visible button, but I don't know how to make the hidden buttons? In one BWOF magazine I found a model that used snaps instead of buttons, but I have also seen coats in shops with hidden buttons in different styles.
  • Pockets. I have made in-seam pockets, but I am still considering the details (I don't know the correct English term for the kind of pocket I have in mind).
  • Fabric. I designed the coat with a specific fabric from my stash in mind, but there is not enough fabric. It could work if I shortened the coat 2 inches, but I don't think I want to do that.
This the curse of home-drafted patterns. Every little detail must be considered, and there is no 'just doing as the pattern suggests'. The time spent on each project escalates rapidly as I gain more experience and get more options.

Saturday, June 14, 2008

LindaF Admin - Fun Facts for Know and Tell

I am moving some of the information form the sidebar to an entry for reference:

Where are you getting your fabric from:

stash - I already have my fabric
55 (61%)
I need to buy fabric for this project
34 (38%)


Where are you from?
USA
44 (66%)
Canada
9 (13%)
Australia / New Zeeland
2 (3%)
UK / Ireland
2 (3%)
Germany
2 (3%)
France
1 (1%)
Netherlands
2 (3%)
other
4 (6%)
total 66 voted

Don't forget you have three days left for indicate which pocket you are inserting in your coat. And if you indicate "other" please put a comment in this post to let Marji what kind of pocket you are using.

Thanks everybody!!!

Lisa: First muslin photos UPDATED 6/16/08


Hi,
Guess I'll have a go at this....here is the front and back of my muslin (V8346). I put on a long sleeve shirt and a sweatshirt to try this fitting (it was only 93 F or 33 C that day). First things: SBA, let out the waist, and raise the bust point. You were right Marji, I only needed to add about 1/2 " (1.25 cm) from the shoulder to the bust. However, I had already traced off the pattern with my length adjustments and figured it would be an easy tuck on the pattern if it didn't work. Next, the back view. I see some wrinkles at the armholes. Could be a couple of things. One is that I didn't trim to the seam lines of the armholes. The sweatshirt has a deep armscye and could be pulling the muslin. Another thing that could be causing the wrinkles is the lack of shoulder pads. If it is something else I am not sure what could be the problem. Don't you love the shorts and the pink backdrop? My daughter took the back view photo in her room.

You can't see them in the photos, but I marked the grainlines, bust, and waist lines. The bust lines are off, but I think I didn't get them marked correctly on the pattern. The waist hits me just right and I am hoping I can make it just a little longer. Will have to see what happens when I lay out the pattern.














Update

Here are 3 photos of me trying to follow Marji's guidelines for muslins.
I have sewn around the armscyes and front edges so you can see where those are hanging out. I drew the bust and waist lines in black ink. I drew the grainlines in red. And that took some doing to figure how out to put those 2 different colors on the same photo!!

Changes:
1. I have pressed my seams and trimmed the sleeve allowance to 5/8ths inch.
2. I have inserted shoulder pads.
3. raised the bust
point by about 1/2 inch
4. released the waist 1 3/4 inc
hes.



I still have drag lines in the back and my grainlines on the side are off. Seeing how I don't need a FBA (ha, ha) , what else would be pulling my grainlines up in the front or down in the back? I am getting out my sewing books to try to figure this one out.

:)




Friday, June 13, 2008

Ms. Fine Fabrics' Jacket

My coat is to be made from a cashmere and super 190 wool, which means it has an incredibly soft hand and drape, and is very, very light weight. In our Santa Barbara climate, 72 degrees and dry, except on rare occasions, one heavy coat a decade is enough. A black jacket is indispensable and I have none. Since I plan to wear this one until it is threadbare, I would like to take the time to do an absolutely perfect job. The jacket is already underway. It is based upon a Montana design made for Vogue Patterns, #2649, which I chose because I made it last year color-blocking a reversible charcoal-to-white cotton-linen blend.The pattern has already been altered to fit perfectly.

For my black jacket, I wanted a more formal look, so I have lengthened the sleeve, and plan to add a series of small buttons to the cuff. I've also dropped the safari pockets, and instead, drafted a pocket within a seam running horizontally at the hip. I plan to top stitch the seam line and pocket with a prick stitch of "heaviest weight" black silk thread on wooden spools, I bought 30 years ago at Marks Tailoring Supply at One Figueroa Street in downtown Los Angeles. It no longer exists, but that one time visit Mrs. Marks store is one of my fondest shopping for sewing memories. I did stock up on supplies for a lifetime.

Just as Anne suggests, I chose the underlining or "canvas", to match the weight of the fabric. I ended up using a piece of Robert Kaufman's Seacell we have here in the store, for no other reason than it felt right when I draped the two fabrics over my hand together. It is similar to a tightly woven, or satin batiste.

I have supported the shoulders with a bias cut piece of wool hair canvas that we import from England. The shoulder reinforcement is pad stitched only to the underlining. I am using Acro (70% rayon, 21% polyester, 9% hair) to interface the lapel. This will be pad stitched to the fabric, and for this I will use a very fine grade of silk thread. It says here it is 50 weight, but it sure feels right so I'm using it. I was taught to use a linen tape to support the roll line, but this fabric is so fine I thought it best to use a piece of rayon seam binding instead.

It has been awhile since I took the time to tailor a coat or jacket, so I am using for reference, my old class notes, "Classic Tailoring Techniques - A Construction Guide to Women's Wear" by Roberto Cabrera and Patricia Flaherty Meyers, that I picked up at the California Mart Fashion Bookstore, and "The Great Coat Sew-Along".

Q&A #4, Underlinings,

Marji said...

Thanks Ann,
Can you comment specifically on the Cashmere blend (you have it in orange and fuschia at $18/yd) coating wool - is the cashmere content high enough on that coating to warrant an underlining?

Gorgeous Things said...

Hi Marji,
It's a pretty tight weave, and it should hold up without an underlining. If you want to underline a cashmere blend or cashmere like that, I'd use a cotton batiste.
HTH!
Ann


Melissa Fehr Trade asks....

Kay Y, I've got a question about adding the walking ease that wasn't really answered by domestichaven's instructions, either. In the last photo you showed adding the wedge to the front facing's edge, but the CF is actually a few inches off the edge because of the coat's overlap. Is it okay to just add the wedge to the side, or do we need to cut up the CF and pivot to add the wedge in the middle? (Forgive me if that's a dim question, I don't know much about pattern alteration, being a very lucky standard size)


Marji said.....

I'm going to find RC's book today (I looked yesterday but it buried itself in a pile and is hiding) and re-read her directions, and I'll dig out Sandra Betzina's directions too.
Last time I read R. Carr's directions it appeared to me that she writes those directions for adding the walking ease along the CF. I'm not sure how she's treating a double breasted coat. or even if it's an issue in a double breasted coat. Melissa, I have to think that adding the wedge on the side seam would be pointless.

Nancy, I've done it both ways, and seen it done both ways. The vintage Vogue pattern I'm using has the turn of cloth allowance already drafted onto the collar - I took pics and will post them later today.
Truth: I'm thinking that if you remember to draft the additional onto your upper collar before cutting then that's the way to do it. If you don't think of it until you're already cut, and the pattern wasn't drafted to include the extra, then you trim off the undercollar when constructing. Sometimes I think the answers are just that pragmatic.

EJVC's coat plans

Hi everyone - sorry about the accidental publishing of a blank post for those of you who saw that... I'm not sure what happened.

I'm a bit behind the curve because I haven't been able to find just what I wanted. I wanted a traditional coat so that I could take advantage of all the expertise here, but then I couldn't find a pattern I wanted and wasn't sure I could afford the super cashmere of my dreams etc etc.

So I'm pretty sure now that I've hit on the solution. I saw Johanna Lu's version of the coat from Vogue 2988 and loved it - so much that I went and bought the pattern several months ago. Anyway I realise that I have enough of a lovely navy wool melton to make it, which as far as I can tell is perfect for the pattern, whose suggested fabrics are "lightweight tweed, lightweight fleece and lightweight crepe" but calls for full interfacing. JL made hers out of a felted wool without interfacing and I thought I would do the same. I need lining and notions but otherwise I am good to go. First stop, muslin! I am very happy to have made my decision.

For those more experienced than I: I've never sewed with wool melton before. I did wash it in the machine on the wool setting and line dry it - it's ultra-beautiful. In my "Fabric Savvy" book by Betzina, it says the following under seam finish: "Butt edges together over 1 1/2 inch wide wool jersey strip. Machine-sew a featherstitch. This joins the layers of melton while attaching to the strip. Trim down one side of the wool jersey strip, and wrap the other around and hand-stitch." So - do you think I should butt-join the seams as this suggests? I've never done it before but I'm game. Second, as it's lined I wouldn't think I would have to trim, wrap, and stitch the wool jersey strip but I don't know - does it have to do with making the seam stronger? Also, Betzina suggests silk thread, I am concerned that it won't be strong enough (I've never sewn with silk thread before). Finally, she suggests eliminating hem allowances and binding the hem with wool jersey or leather - I can't imagine that working on a lined jacket. Any suggestions?

EDIT: I notice in Johanna's review for PR that the coat doesn't have pockets! Major problem in a winter coat! I think I'd like to add welt pockets, since she says the seams aren't suitable for side seam pockets. I think I have maybe made one set of welt pockets about 20 years ago... does anyone know why it wouldn't be a good idea other than my lack of skill?

Elizabeth

Ann Steeves: Underlining Coating Fabrics

Hi folks! It is so inspiring to see what people are doing. I've been AWOL on this list because it's so busy right now, but I think I'm going to join in and sew myself a coat.

Marji asked me to talk a bit about underlining coatings. Forgive me if you know this already.

What is underlining?
Underlining is a layer of fabric that is attached to your coating shell fabric. It's cut from the same pattern piece and attached to the wrong side of your fabric. Those two pieces of fabric are then treated as one. Underlining provides support to your coating fabric, eliminating stretching, bagging and pulling. It also adds a layer of warmth. And if you have a loosely woven fabric like a bouclé, it reinforces that fabric at stress points. It also acts to conceal seam allowance show-through in certain fabrics.

Fabrics used for underlining
You can use lots and lots of different fabrics for underlining, depending on your desired result. The underlining can either match the hand and drape of your fabric, or you can choose an underlining that will alter the characteristics of your fabric. In the majority of cases, I recommend matching your underlining to the drape, weight and hand of your shell fabric.

I've used many different underlining fabrics in coats. One of my favorite underlining choices is a plain, firmly woven cotton batiste. I've found that it supports your garment without adding any weight. It doesn't change the hand of your fabric, and it doesn't grab your shell fabric. Another great choice for underlining is silk organza. Unlike batiste, it can change the hand of certain fabrics, though with coating it is not as much of an issue. I have had problems with organza and certain types of wools. Organza and crepey and "hairy" wools and fur fabrics tend to grab at eachother's fibers and cause some weird pulling. But it's a great underlining for many bouclés, silks and blends.

I live in Boston, which can get mighty cold and raw in the winter. I made a bouclé coat several years ago. You can see a review of it Here. This fabric, while luxurious and beautiful, does a bad job of cutting the Northeast winds that whip in off the ocean here. To shore it up, both structurally and from an insulating standpoint, I underlined it with a cotton flannel. The flannel makes the coat toasty warm, but not bulky.

Attaching the underlining
First - pretreat your underlining. Shrink it before you cut into it, so you don't have a disaster later. Also make sure you cut your underlining on the same grain as the fabric. For precision, use a single layer cutting layout for your underlining. After all, if you're taking the time to do an underlining, you might as well take the few extra minutes to get it perfect, right?

Once it's cut, I attach the underlining to the fabric by hand basting it to the body of the fabric. My basting stitches run parallel to the grain of the fabric. They are 1 to 1 1/2 inches long, and I catch just a thread or two of my shell fabric at each stitch, as you can see here:


This takes time, but it's far superior to basting only at the seamlines, because it structurally reinforces the shell fabric. This is critical for areas that will receive a lot of stress from being bent and sat on, like elbows and rumps. It helps your fabric retain its shape. It's really, really important if you're using a cashmere or fur fabric, which has a tendency to bag out.

Do I always have to underline?
Like I said above, certain fabrics really do need underlining to hold up to the stress the average coat takes. Bouclés, cashmeres, fur fabrics and blends? You bet. You'll be far happier with the results if you underline. Boiled wools, flannels and meltons? It's not a requirement. Here's how I determine whether I should underline a coating. Take an 8 inch square of fabric. Mess around with it. Drape it over a ham or other rounded object (your bent knee is good for this exercise). Pull it in all directions. Try to approximate things like the bend of your elbow. Give it a good workout, then see how it recovers. Press it and see if it retains its shape or not. That will give you a good idea of whether you need to underline. Also, think about the use your coat will get. Is it going to be THE COAT for winter? Underline it. If it's only going to get occasional use, and it's a very tightly woven melton, then you can get away without underlining. It's your call.

I hope this helps answer some questions you might have. I'm really enjoying watching the process. I hope I'll be able to join in!

Ann Steeves

.......................
From the comments:
Marji said...

Thanks Ann,
Can you comment specifically on the cashmere blend (you have it in orange and fuschia at $18/yd) coating wool - is the cashmere content high enough on that coating to warrant an underlining?

Gorgeous Things said...

Hi Marji,

It's a pretty tight weave, and it should hold up without an underlining. If you want to underline a cashmere blend or cashmere like that, I'd use a cotton batiste.

HTH!
Ann

Thursday, June 12, 2008

Nneka: From Teal to Tangerine


My teal wool blend didn't quite work out as I imagined (see my blog entry here), so I ordered the Bright Orange wool/cashmere blend from Gorgeous Fabrics and a creamy, yellow silk jacquard from Denver Fabrics to make up my coat. I'm making Vogue 2935, a semi-fitted, hip-length coat.

I've gotten most of my notions and supplies, but I haven't yet decided what to do about underlining. Truthfully, I'm waiting to see what others who are using this fabric choose to guide me as I don't really know what I'm looking for in an underlining. From what I've gleaned on this blog, I figure I need some sort of underlining to support the cashmere portion of the blend so it doesn't bag out in elbows. I also plan to take my fabric to the only couture fabric store in my area that I know of, Richard Brooks, to get some advice and actually feel the possibilities available like Marji did in her earlier post.

I'll be tracing off my pattern and doing some flat pattern alteration work this weekend.