Showing posts with label Lisette M. Show all posts
Showing posts with label Lisette M. Show all posts

Monday, June 30, 2008

Lisette's second muslin Burda WOF 9/2005



Following Marji's advise I raised the waistline and let out the seams below the waist on the front princess seams. This removed the wrinkles on the sides above the waist. The front grainlines are also now okay and the hem edge is even so I didn't see the need for the fisheye darts. I consulted with Paco about the ease in this coat since he made it twice. He says it is designed with jacket ease to be worn with dresses and sweaters.



I put in the sleeves and the collar. I believe the grainline looks good on the sleeves. The photograph I took of the side where I did a forward shoulder adjustment(FSA) did not turn out so what you are looking at has no FSA. The sleeve has a good length.



The back shows a bump on the right hip, I think something is wonky on my seam there and/or the sweater I'm wearing it's causing it. I had my mother check on the back neckline and the seam was where it was supposed to be so I did no alterations there.





Does anyone see anything else I need to address? Thanks!

Tuesday, June 17, 2008

Lisette M's Muslin Burda WOF 9/2005 102

I have completed my muslin with the standard alterations I make: I added to the back waist length and I traced size 38 at the neckline, shoulders and armhole, 40 at the chest and from the waist down a 42( I usually trace a 40 at the hip but because KayY had mentioned not enough ease in this area I decided to go up). I am wearing a sweater underneath, I rarely wear jackets under coats and therefore don't need the extra ease for that.




I measured the ease at the hip and thought I had plenty (46 in) but I forgot this was a double breasted coat and as you can tell from the pictures I have no ease in the hip area.

Without the shoulder pads I thought I would need a forward shoulder adjustment but with the pads I don't think so, what is your opinion?

These pictures are without shoulder pads(as are the two above):



These pictures have a 3/8 inch shoulder pad in:





I did not add walking ease. This alteration was discussed in KayY post but the discussion was not finished. Is it recommended for a double breasted coat?In Power Sewing by Sandra Betzina she does not make this distinction and if it is recommended in this coat pattern to include the wedge in CF up to the neckline would cut right through the "bib" and therefore alter its shape.

I marked the welt pockets which will be covered by tabs but somehow I missed since the two parts (the welt pocket cuts across the seam line) do not match. Burda has you mark the welt according to your size on the side panel and then to join the pattern pieces and extend it to the front. I did that but did not turn out :o

I don't see any other issues in the fit but that is why I joined this great sew-along ...for all the extra eyes to appraise the fit!

After I receive your comments I will add the sleeves and update my entry.