Saturday, August 16, 2008

Claire S. - V8346 - I've got Sleeves !!!

I've made it through another attempt at sleeves.

The McCalls sleeve was giving me trouble and I was still fighting with it (it was winning...) when I saw the Threads instructions for converting 1-pc sleeves.

I psyched myself up and spent 2 evenings tracing and redrafting the 1-pc Vogue sleeve into a 2-pc sleeve and here are the results...

Front & Back :


There are 2 right sides here, the one taken in the shade looked pretty good till I saw how the sun really showed up the wrinkles.


I've just seen Els' post on the diagonal wrinkle problem and I guess I'm going to have to move the notch forward a bit on the right sleeve. I don't think I have to do anything to the left sleeve, do I ?

The last time I asked about resetting a sleeve I was told to take the whole thing out and set it in from scratch...is it the same now ? Would I be able to unpick the basting on the back of the armhole seam and just ease it all forward a bit ? I didn't gather the ease between the notches, I pretty much eased most of the armhole - just left the underarm with no easing, about 4-5" or so.

Looking at the whole body shot again from the side, I see the waistline is not actually level yet...CF is still higher than CB. I think I'll adjust this yet again, CB needs to come up at least another 1/2".

So, any thoughts, re: the sleeves or anything else you may see ?

LindaF - Muslin with sleeves

Burda 7855

Here are my final fitting photos (hopefully).

I apologize for the terrible shots. First off the front is not pinned correctly. I was in a rush yesterday, but wanted to get photos taken. I didn't even check it in the mirror and the front is off by a good inch. I think that explains the terrible looking back. I'll double check that later.

Also I am bloated, so there are drag lines where they shouldn't be. I purposely don't tackle fitting issues during a certain five days of the month for this very reason. I can go up a whole cup size. My doctor told me that this thing should go away any time now, given my age. But if only my body would listen, sheesh.

I have read Els's entry for the sleeve wrinkle problem. I am going to take one of these out and fix it per her instructions. But I am going to wait the five days first.

My fabric is at the cleaners getting a good steam press. I have a local source who will take the fabric for me. Many thank to Marji who suggested this to me. But for pieces this large they send it out some where, so it is taking two weeks to get it back. I should get it back in time to keep on schedule.

Take care everybody.

Els: Diagonal wrinkles in sleeves

I made an example diagram about diagonal wrinkles in sleeves caused by and what to do about it .

Hope this will help some of you who has those wrinkles.


Sleeve 1
Diagonal wrinkles coming from the back of the sleeve starting at the armscye and can appear from the elbow too can be caused by a very straight posture. To get rid of those wrinkles mark a new shoulder seam notch (see the red line) and match that new notch with the shoulder seam. The sleeve should be moved more forward into the armscye.


Sleeve 2
Diagonal wrinkles starting at the front part from the upper arm till the elbow line can be caused by forward shoulder posture or by a high round back.To get rid of those wrinkles mark a new shoulder notch (see the red line) and match the new notch with the shoulder seam. The sleeve should be moved more towards the back into the armscye.



Friday, August 15, 2008

KayY: Boring, Boring, Boring

I made a muslin of my coat, for which I'd chosen a BWOF pattern:


I used some medium-beefy corduroy for the muslin which does a decent job of being a coat muslin. However the lines I dutifully sewed in to mark CF and waist etc. are lost. I have drawn in a black line at the marked waist in this picture of the front.

























The sizing for this coat starts at 38 (12) whereas I'd usually choose a 36 (10) in WOF sizing - I went ahead based on earlier reports that this coat had little ease, and the fact that the pattern ease on the 38 measured OK according to Marji's guidelines. I am wearing it overtop a jacket (which also has shoulderpads) and I think it is a size too big in the shoulders but more so in the back. I think the bust and hips are OK but the waist/shoulders/upper back are just sloppy.

Things to note about the picture:

- I didn't pin to secure the leading edge of the left front, and it is sagging a bit, which I think is causing those wrinkles in the upper left front (leading to the pin)
- the lower front edge was curling under a bit
- the picture is a little off the vertical (I'm not that crooked)
- the shoulders are too wide, as is the back from the shoulders down to the hip
- the sleeves are too long (they are folded up at the hem line in this picture, and need an inch or so less)

More pictures are here.

Overall, this pattern is just not grabbing me, even a little bit. Less so when I think about my chosen stash fabric.

Sooo my friend Gail (who also thought the muslin was kind of meh) brought over a couple of Vintage Vogue coat patterns from her extensive collection for my consideration. Interestingly, both have inset pieces of the same kind as the BWOF pattern.

Here they are:

















I am kind of leaning to the Christian Dior, except will have to pay careful attention to the fit as it's noted to be "high-fitted", which I assume means a close fit, and is a size (ahem) 8.

Edited later the same day ...

I am so going to make the Dior pattern! I opened it up and it's cut on the bias, which is just fascinating to me somehow. My wool has a noticeable straight-grain weave, so the bias should look really good (the inset front band is cut on the straight grain, as are the sleeves).

I started a crash course in grading (Threads issue 101) and will cut a muslin tomorrow. NOW I can get excited about making a coat!

Cennetta: Vogue 8438 Muslin

Boy I'm so behind on the Great Coat Sew Along. Two weeks ago, I completed the first go round of the Muslin fitting and have a few adjustments to make. I didn't attempt to make any of my normal changes, straight from the pattern. Here are the photos and noted changes. If you can identify additional changes needed, please don't hesitate to comment.



I think I need to do a FBA. There a bit of gapping at the front closure across the bustline



Too much room from the shoulder blades through the waist area. I forgot to insert the shoulder pads. They will elminate some of the excess.





Remove some of the fullness along the lower half of the front princess seam. Sway back adjustment needed. Coat stand away from the small of my back.



Last week I went to Vogue fabrics hunting for the perfect lining but came away empty handed. I'm also thinking about adding a unlining to help protect me from the Chicago winds.

This weekend I'll start making the adjustments mentioned above.

Happy Sewing!
C

Tuesday, August 12, 2008

Mary OK's Marfy F1022 knockoff muslin changes



At Marji's suggestion, I took out about 24" of the width of of the muslin to make the shape of my coat more like the design I am copying. The pleats are now 1 - 1.5 " deep, instead of 3" deep. Here is the result:


I optimistically named these photos "last muslin," but I'm not so sure about the wrinkles on the sleeves. Will they fill out with sleeve heads, lining, etc? I do like the design change, though.

Mary Pat, I am behind too. I have been working on a silk dress for a party this weekend. I can think about the coat again after the middle of next week.

Monday, August 11, 2008

MaryPat: A bit behind

I am behind on my coat. I have fabric. lining, interfacing etc. I have changed my pattern a few times and I do not have the mockup done. I might use a pattern I have used in the past as a way to catch up.
However, I do have a scarf knit that matches my coat, or at least the fabric.
We were on holiday at my SIL's cottage in Northern Ontario last week and on the long drive North through Michigan we stopped in Mackinac City. I went to a lovely little yarn shop there and stocked up on novelty yarns to knit on the trip. All were marked down by about 75%.
So, my priorities might be a bit mixed up, but now I need to make the darn coat so I can wear the bargain scarf.

Wednesday, July 30, 2008

Drafting a 2 piece sleeve using a one piece pattern.

A member here was kind enough to send me this on drafting a 2 pc sleeve from a pattern for a one piece.
It's what I would have done, had I taken the time. It's an art - not an exact science, the conversion of a balanced symmetrical sleeve pattern, so be prepared to have a couple of goes at it in the muslin stage.

I'm not going to leave this up long, so if you plan to do this, read through it and get the directions down. Consider this a lending of the info. I'm going to take this down when I return from my next trip, August 10.

The article is by Margaret Komives and appeared in the Dec/Jan 1991 issue of Threads.

Gry: My final collar

After a lot of experiments, I think I have finally found the perfect collar.



I think it fits the coat quite nicely. It is large enough to balance the A-line shape and has the right vintage feel to suit the coat.

I had quite a bit of fun constructing it. Details about the construction on my blog fromthestash.blogspot.com. However, I think I need a little help in how to sew this collar in the best way.

Here are the pattern pieces. I know they look kind of weird, with the very curved stand and the straight collar piece, but this is what gives the draped effect. I am going to cut the stand grain-wise and interface as I would do with an ordinary collar stand. The problem is the collar pieces. Both over and under collar are cut on the bias without a centre back seam. Should I make a centre back seam? I am also uncertain if I should interface the collar? The interfacing I have bought is woven and fusible.

Here is a picture of the fabric. I don't know the name of the type of fabric, but it is a medium-heavy quality, tightly woven, almost like felted.


I just need to make a few adjustments on the pattern and draw linning pieces, then I am finally ready to cut the fabric.

Monday, July 28, 2008

Muslins: A Review

I offered to help Marji review the steps she has presented for analyzing a muslin. As a good teacher, Marji has modeled the thought-process for us. It is now up to us to help each other, and comment on each other's muslins. I have so appreciated the comments people have shared with me. Maybe we can each resolve to comment on at least one aspect of another person's work each day. Most of us participate in a project like this because we want to share the experience with like-minded people, and we all find the conversation motivating.

Marji sent me this quick checklist of what to look for in a fitting muslin.

First, start with an overall look: If it's so tight that...

  • it doesn't hang straight from the shoulders
  • it hangs up on your body instead of gliding over it
  • it has horizontal wrinkles
    • showing the strain as it goes around your body;
    • showing where wider parts (as at hips) ride up to provide more room at waist
  • it gaps where you pin center fronts together
...then let it out (that's what the 1-inch seams are for!).

Begin at the top, and making ONE change at a time:

  • Check neckline for proximity to neck (light chain around neck is great for this) .
  • Claire S. is wearing a light chain in one of her muslin pics, and this is where Marji began to advise her to adjust the size around the neck. See the start of that conversation here. Scroll to the bottom of the post and click on the picture on the left to enlarge it. Look at how the neckline sits away from Claire's neck in relation to the chain. See how nice it looks now.

    Tany discussed the fit of the neckline of her coat. Els noticed that it seemed to stand away from her neck, and Tany checked it for stretch and shoulder slope. She adjusted the fit by changing the shoulder pads. See the first neckline here and the adjusted neckline here.

  • Check shoulder seam placement (should run from bottom of ear to top of shoulder). Marji demonstrates this on Claire's muslin here.

  • Check shoulder width/upper chest width/upper back width (horizontal ripples indicate it is too tight, vertical ripples mean it is too loose) Liana's first muslin has a large vertical fold down the back, which she has corrected in the second set of pictures in this post.
  • Check for fit at bust. The ripples on Poppy's muslin point to the bust, indicating she needs a full bust adjustment.

  • Check width and ease through waist/hip (horizontal ripples indicate it is too tight, vertical ripples mean it is too loose—the ripples may point to the problem)

  • Check that bust/waist/hip lines are horizontal/perpendicular to floor

  • Check that vertical seams hang straight —particularly side seams and CF/CB. Cafe Couture realized her vintage pattern is smaller than today's sizing. The center fronts do not line up in her first muslin. I've had persistent problems with my side seams, and finally have realized the pulling at my bust indicated a need for more length there. See here and here

  • Check sleeve fit (horizontal ripples indicate it is too tight, vertical ripples mean it is too loose).

  • Then, when the mechanics of fit are satisfactory, look at the design lines and proportions of the collar/pocket placement.

    You can also review examples of Marji's problem-solving by reviewing the posts linked below:

    The Great Coat Sew-Along: Thoughts on The Fitting Muslin

    The Great Coat Sew-Along: Q&A #2

    The Great Coat Sew-Along: Constructing and Fitting the Muslin Part 1

    The Great Coat Sew-Along: Constructing and Fitting the Muslin, Part 2

    The Great Coat Sew-Along: Analyzing and Altering The Fitting Muslin

    The Great Coat Sew-Along: Analyzing and Altering The Fitting Muslin, part 2, LisaC

    The Great Coat Sew-Along: Marji: Tips for Presenting Your Fitting Muslin

    The Great Coat Sew-Along: Index for Fitting the Muslin (Toile) posts

    The Great Coat Sew-Along: Heidi's Muslin - V7979

    I hope this helps! The Great Coat Sew-Along has become my favorite stop on the web! I love seeing what everyone is doing. Did you know that there have been 194 posts, not including the comments?


    —MaryOK

    Sunday, July 27, 2008

    Claire S. - The Neck Fits !

    "this post has been draft since Thursday, waiting for pics" - here we go...

    I just didn't quite 'get' the instruction to cut a strip of muslin 2 sizes smaller from the neck of the original pattern and sew it on the muslin. BUT, I read (and re-read) all my books, searched the Net, and re-read the books again for making a neckline smaller. I'm not sure I followed 'proper' sewing tecniques but the neckline now fits alot better.

    Those 1" seam allowances came in handy. I had already done a round back adj. and the CB was sitting ok on my neck. The long seams where the lapels will go had the 1" seam allowance. What I did was mark 3/4" on each shoulder seam seam allowance closer to the neck and just drew a line from CB to that mark, decreasing the neck width, and tapering back down the lapel to the original marking at the bottom. The S.A. on the back neckline was a tad short but it was just enough to get this basting stitch in.

    How did I do ? and am I now ready to try the sleeves again ?
    I've also noticed that although the line I drew from my ear to shoulder on each side matches up with its seam and looks ok, I only moved the shoulder seam forward on the RIGHT side. The seam on the left side is the original one which seems to have moved into place after adjusting for the high round neck and adding shoulder pads - is it possible to only have to move 'one' shoulder ?


    Saturday, July 26, 2008

    Mary OK Burda redrafted to Marfy F1022


    Edited 7/26/08 to add:



    Thank you, Digs, for noticing the forward tilt of the sideseam. This has been a persistent problem for me. I finally added a 3/4 " wedge of fabric at the bust line. This has brought the side seam back in line. Hooray!



    7/20/08:
    Here is the redrafted muslin, looking more like Marfy F1022!

    I used the instructions in chapter 8 of Modern Pattern Design by Harriet Pepin (142) to adjust the sweep of the skirt. In the design for the eight-gore skirt, she distributes the movement to increase the sweep toward the back. The changes :

    1. Add width to each panel according to Pepin's instructions on P. 19 of chapter 8
    2. Start the break 3" below bust line in front, side and back
    3. Draft the pleats to be 1" deep at the top and almost 3" deep at the hem, throwing the pleat on the bias
    4. Change the grain on the side front and side back pieces, so the grain line runs down the center of the panel (drawn on this muslin, but cut according to the old grain line)
    5. Reduce sleeve cap ease by 3/8". There is now 1 and 3/8" ease in the sleeve cap.


    I'm still wondering if it tilts up too much in the front. I think there is enough room in the back:

    I also tested the sleeve tab as shown in Burda 9/2006 #101. I don't like it. See how the sleeve is twisted on the model's arms? Makes ya wonder. . . . I will probably do a long sleeve vent instead, or a diagonal cuff in velvet (same as collar), as in the bottom picture:

    Friday, July 25, 2008

    Note from Marji

    I'm working today and tomorrow on the blue silk dresses I need to make for dsd's to be in their uncle's wedding at the end of the month.
    While taking breaks I'm going to work my way down through the muslin posts and try to leave everyone some feedback.

    In order to keep information together, I'm using the admin priviledge of going in and adding the feedback as an edit right in the body of your post.
    If you don't want me writing an edit on your post, email me and tell me to leave it alone. I won't be offended.

    Funny, but now that I've gotten started on the coats, I want to keep going and get all my underlining mounted and the thread tracing done....and here I am back to working on silk dresses.
    I'll post on my regular blog on Monday with the results of the dressmaking.
    Marji

    Thursday, July 24, 2008

    Marji - my own projects


    I'm hoping to get 3 garments made in the process of hosting this The Great Coat Sewalong.
    I'd started to muslin the vintage pattern Vogue 1356 when I had occasion to flip through my whole collection of Patrones and Burda WOF looking for something else, and came across this.

    I set everything aside for awhile and I evaluated muslins, worked on other projects and went on vacation. And, I searched for buttons - there are a lot of buttons on this coat. I found one locally that I loved, but it's a long discontinued button and doesnt' exist anywhere anymore.
    I still need to trace this pattern, and make a muslin to see if it'll even work on me. And, I need to make a decision about buttons. This is where I am so far. The two on the right are my top choices at the moment.
    Input gladly accepted.


    Meanwhile I had to begin working on a project for this TGCSA. The other two projects I had in mind when I started this group are short jackets. My need for coats is seriously dwarfed by my love for coats, and my existing collection. Whereas I will get significantly more wear from short jackets. It just doesn't get cold enough here, long enough, to warrant a lot of coat wearing.
    The jacket I chose to work on first is a double breasted tailored number by Guy Larouche from Vogue. And of course, it's just gone OOP, although it is still available on their website.



    I altered my pattern per my usual alterations for Vogue, and cut my typical 1" seam allowances, and constructed the muslin.
    I wonder how many people have made this pattern as is?


    Look at the shape of the side front on the pattern tissue, and then look at my revised piece after alterations in the muslin. (the muslin pattern piece is under the pattern tissue). The front actually pleated along that princess line there was so much fabric and flare drafted into the original pattern.
    There is that much flare built into the back too, however, since I would normally have had to make a sway back adj - which I didn't do since I was making a muslin and I wanted to see how much I would need in actuality rather than arbitrarily making the alteration on the tissue - and I would normally make a bit of allowance for my protruding backside, I didn't have to do much to the back. The flare built in by Vogue took care of that particular fitting issue for me.
    The interesting thing is, this isn't supposed to be a flared jacket.

    Other than that though, I added a bit more in the bustline at the princess seam, and added additional length to my CF panel, and the pattern fit ok.

    For this jacket I'm using the double face cashmere/wool blend coating from Gorgeous Fabrics.
    For the lining, I rifled through my rather prodigious stash and came up with the perfect use for a piece of Vietnamese Silk I have been hanging onto for the last 4 years trying to come up with a suitable use for it. These are very interesting jacquard woven silks, being a cottage industry in Vietnam, and being woven on some very old looms that some villagers have pulled out of storage. The woven width is less than 36". Somewhat recently I thought I saw some for sale at Waechters.

    The colors are perfect both for the coating wool I'm using and for the wool that I'm planning a pair of pants from to wear with it. The pant wool has been in my stash since ... the days of cavemen? Since the 80's anyway.

    The color of the jacket matches perfectly one of the colors in the plaid of the pant, and will be great together. (ignore the yarn).

    Ignore also the fact that I've cut the lining out already. I'm trying to work ahead a bit to get some installments written in advance of when they're expected to be up. ;)