Wednesday, June 25, 2008

Liana's Muslin - Fitting Part 2


For reference, here's the Marfy pattern I'm using.

(Working hard to get Marji's opinion before she leaves us to our own devices.)

I inserted the sleeves and the collar. (I love the collar!) Then I decided to narrow the back. I figured the pattern ease with their ideal measurements vs the ease with my measurements and found that I have more ease all around. I narrowed the CB seam by 1" at the bust, angling to 1 3/4" at the waist and hip. I also narrowed the side back seams by a little to make up the total ease difference. It turns out that I like the original better, I think. With the suit jacket on, the coat is too tight across the hips IMO, and although it's all right with just a blouse on, I like the drape of the non-changed silhouette better. So unless I hear differently, I think I'll make it up as is. I think in the cashmere, the back is going to drape much better than the muslin, and that will make a difference.

I worry a bit about the CF off-graining being too much, but again, you can't tell until you get it in the real fabric, and Roberta Carr says you can always cut it off with no ill effects, so that will be the first thing I check.

I do agree with the idea of a soft chest pad, although the sleeves and collar have helped a lot. I may put a little more padding on the right shoulder, at least in the back.

Here are many photos.
The first set is with No Changes and a Blouse underneath.



Back Narrowed and a Blouse underneath


Back Narrowed and a Suit Jacket underneath


Once again, all photos larger here.

Original post below. Should I delete this part?

There are horizontal lines at the waist and hip on the muslin although they're showing only faintly. I have the shoulder pads pushed out 1/2" out from the shoulder seam, which is marked also. The front edge is turned under and the hem is turned up. I have a suit jacket on under the muslin in the top 3 photos, and I realize that the collar is making those weird vertical lines, although originally I thought they were a hollow-chest thing. I have a low right shoulder, so I have a little extra pad (maybe 1/4") on the right.



All Photos Larger Here

I'm going to construct the sleeves but won't sew them in yet.

Marji: Alteration for forward shoulder at the muslin stage

Often, I think it's nearly impossible to tell, from photos such as these, whether or not someone needs a forward shoulder adjustment. Especially if it's already in the correct place at the neck, (which many have been.)

Claire has taken such a set of pictures though that provide us with some great opportunities to demonstrate where it is obvious and necessary to move a shoulder seam. So again, I'm co-opting Claire's pictures to show how to move the shoulder seam forward.

The black line I drew on Claire's neck illustrates how to determine where the shoulder seam should originate. It is in line with the back of the ear.

I would do this alteration after lifting the back neck for the forward neck alteration. (See previous post)

  1. Mark correct placement of shoulder seam on both front and back pieces. Here, it looks as if the back may be on or just over the cutting line of the current back.
  2. Rip out current shoulder seam.
  3. Attach another piece of muslin as extension to back at the shoulder.
  4. Fold front under at new shoulder seam line and pin along new shoulder seam line at back (in this case, almost along the old cutting line).
  5. Try on for fit. Adjust a bit if necessary. Stitch in place, still basting.
With a move this drastic, undoubtedly the sleeve cap is going to need adjusting too.
If you have a fitting book that demonstrates the change, great, look it up. If you don't, I'll try to get back to draw it up later.

I almost forgot: I think you may need to add room for a shoulder pad too, which means you will change the angle of the shoulder seam. This is what it would look like on the pattern draft. Back and front, equal, after moving it forward.


Right now I've got to finish laundry, pack, wrap shower gifts, and organize my household to manage without me for the next week. And I leave at 6 a.m..

Edited - Claire S. - V8346,View A - 1st Fitting

Edited with a question - thanks everyone for the comments.

Marji - I don't 'usually' do anything, swayback, or high round back...I'm too new at this. Anything suggested to me will require research or questions to all of you to figure out exactly HOW to accomplish adjustments. I have a couple of sewing books and I think they will be well used during this process.

That being said, thinking I would have to fix the bust before the waist, I did some reasearch on Cidell's suggested low bust adjustment and successfully did one side !!! I was AMAZED - it was my very first adjustment of any kind, I was giddy LOL

Sometime during that process I remeasured the muslin's back length and my own to find out they are the same and my waist should be right on - It's not, of course, so I was on my way back to ask what to do about it and lo and behold the answer is already posted - with pictures no less, thanks alot - I can do this.

Now, the question. One bust is adjusted, one is still way off. Do I do the other bust then the high round neck - or the neck first. I think fixing the neck will move the shoulders forward and the bust down, at least some, won't it ???



Here goes, I cut a size 16, basted every line, and sewed it together. I didn't think it was too bad til I saw the pictures. The grainlines are straight, the shoulders are in the right place (I'm pretty sure).

Here are my 'I thinks'

1) I think the length of the shoulders and the width of the upper back are ok
2) I think the bust points are too high (or I'm too low LOL)
3a) I think the stitched waistline is too low - if it is meant to be at the natural indent of my waist (that's about 1-inch higher)
3b) but the waist is too tight when I match up the CF - so would fixing the height of the waistline also fix this ?

Now, I don't know how to fix any of these, so here are my pics and request for HELP ! :-)

Front/Back


The 2 Sides



The 2 Shoulders



Marji: Altering in the muslin for high round neck


Blogger Marji said...

After you get the waist taken care of, and open out the side seam a bit through the waist area, you need to address the back neck. Do you usually make a high round back adjustment to your patterns?

It's accomplished by slicing your pattern horizontally from CB to armscye a couple of inches below the existing neckline, lifting the neck the amount you need (I'm looking here and thinking you might need as much as 1.25" although that's just a guess) and then trueing up your CB seamline.
Because you're already in the muslin, I'd draw the lines on the muslin, slice it open, insert a wedge of fabric and stitch it in.


Then check to see if the shoulder seam lies on top of your shoulder. It is common that a forward shoulder adjustment accompanies an adjustment for a high round neck, but not always.

Your shoulder seam should originate at the join of your neck and shoulder, just under the back of your ear, and lie on the top of your shoulder, terminating at the bone at the end of your shoulder. If you have trouble determining where that bone is, put your index finger on where you think it is while your arm is at rest, then start lifting the arm - you'll be able to feel the bone then. See next post. You do need it.


It is important that the shoulder seam be at the top of the shoulder, so that the sleeve hangs properly.
Once you've done these recommended adjustments, put both sleeves in, and put one collar on (you don't need to put on the under collar too) and see if it fits better.

Laura's muslin

I just erased my whole post! Ugh!!! Now it's late, so I'm just gonna have to make it short and sweet.

I'm making Vogue 1266, view C (brown coat) out of a dark red wool from Gorgeous Fabrics (Princess Red) with the cuffs and collar in black faux lambs wool from Emma One Sock. I have no clue on the lining yet.

I cut my size (based on the bust) straight from the pattern with no adjustments.

Pics with no sleeves:
I've got the shoulder pad in the left shoulder. I forgot to turn under / cut off the SA on the right. The waist hits my own waist perfectly. I do have 6" of ease in the waist and am missing a defined waist. As you can see there are some vertical folds in the back. Too much width? There's also one on the front by the bust.

I very much feel/look like a sack of potatoes.

Pics with the sleeve:
I'm thinking it's a size too big.

I have 6" of ease in the waist
and 6" of ease in the hip.
Again, I need a waist.

There's some goofiness going on at the CF, but I think it might be the way I've got it pinned. If you don't think so, please let me know.

The last pic is of the arm bent and pulling forward. There seems to be too much bunching going on. More than there should be.
I want to do bound buttonholes. I've never done them before either. I'd also like to do piping around the lining.

(Oh, can someone please tell me how to upload pics so I don't have to keep dragging them down to where I want them? Thanks!)

Let me know you you think. Thanks!

Tuesday, June 24, 2008

6/30 update Trench - Susan


These pictures were taken after I let out the seams from the waist down on the side, back, and front & back princess seams. I think there may some some extra fullness now that I will get rid of. For starters I will take the front princess seams back in and try it on again. If it still has extra, then I will take in the back princess seams. Or would it be better to adjust the side seams first?

I do have shoulder pads in and the arm syce seems ok. I am unsure if the arm syce starts in the right place - is it too far out?

I now have the waist marked - it is about 1" high. I think I should lengthen it.

Also, I need to make a forward shoulder adjustment.

Comments please? More pictures on my blog.
------------------------------------------------------------------------------------------------


6/28/08 - Now that I have it overlapped and pinned correctly, it fits much better :) This is on over a jacket. I see pulling on the front and back above the hips so I think the side seams need to be let out below the waist. I did not put shoulder pads in but I think I have room. Any comments and suggestions would be greatly appreciated before I add the sleeves.





I have on a jacket underneath and I like the fit but then I usually like things larger than they should be. I cut a 16 due to the flat measurements and needing more ease than the pattern has built in to wear over jackets, etc. I usually cut a 14 for a top. Should I go down a size? I can tell this needs some work but don't really know where to start.

This is Simplicity 4084.

I am making View A front and View C back.

Jamie: Hubby's muslin - Burda 8275

As a refresher, here is the picture of the coat:


I assembled the muslin and had hubby try it on. I have the sleeve assembled, but not set in yet - my in-laws are in town and have taken over my sewing room. I won't have sleeve pictures to add until probably Thursday.

The waist actually hits him just about at his natural waist. He has lost 30lbs over the past several months and probably has another 15lbs to lose (basically, what is left of his belly). He hasn't dropped in size too much, just firmed up, so I'm not worried about it being too big later. I'm also going to shorten it quite a bit to hit him somewhere between hip/high thigh level. I should probably cut it off where it will ultimately hit and then add the sleeve with a shoulder pad and see if it makes any difference.

I took these pictures with him wearing a sweatshirt, as that is the heaviest thing he'll probably ever wear underneath the coat; however, the wool is actually a double-faced (but neither of us liked the copenhagen blue color on the reverse so I don't care about hiding that side under interfacing and lining). It is rather thick so he'll probably not wear anything heavy underneath it. Our coldest winter temperatures go into the teens, but usually only for a week or two. I think the next set of pictures will be without anything heavy underneath it.

A few questions about the fit. It is good through the shoulders, but there are some vertical wrinkles in the back that I'm not sure what to do about. There is a curved seam in the upper center back that I'm going to straighten and that might take care of those wrinkles. There is also a little bit of gape in the center front where the lapels meet. I'm not sure if that has to do with his slight protruding belly, but will that go away as his belly continues to recede or will it just get worse? Any ideas on what I can do about that? I think the men's tailoring book might have some fit advice on that topic, but I haven't looked at it yet. I think the pockets are in the right places - he doesn't keep his hands in his pockets anyway.

There are a few great things about this pattern that I've already noticed. There are separate upper and under collar pieces (I already have the undercollar felt so keep extra bulk out of the collar). There are separate lining pieces for the entire coat and they include lining welt pockets (which I was planning on adding before I knew they already existed). I also like the fact that this coat has vented sleeves and a walking vent in the back - although not as necessary since this will be a shortened coat, I like the way it looks. The welt pockets on the side also cut across the seam between the front and side pieces (no actual side seams).

Overall, I think the fit is pretty decent. I would greatly appreciate any ideas on how to make it better. Fortunately, I'm making this in a dark charcoal gray so any residual fitting issues that I might not be able to completely work out won't be as apparent as if I were using a lighter color.

I'm not sure I'll get to my own muslin in time to post for critiques, but Marji already gave me some good ideas on how to make my houndstooth more coat-worthy so I'm more optimistic about using this fabric/pattern combo that I originally posted about.

Monday, June 23, 2008

Michelle L.'s Muslin for comments

I am making a coat for my fiance, and he selected Vogue 7988, view c, the single breasted version:


I have just completed the muslin, and here are the photos.

The front:

I drew a chalk line at what the pattern indicated was the center-front. I cut a straight 44, and he has enough room to put the muslin on on over a suit jacket. It is pinned closed in the photos.

The back:

There are two chalk lines drawn on the back, the top one is the line that the pattern indicates is the waist, the bottom is Jeremy's actual waist. because of the shape of the back, I don't know that it matters that his waist it lower than the pattern, but would welcome any comments. I did not bother with properly constructing the back flap for the muslin, but just folded it under.

The back appears to be just slightly too wide, i.e, the two vertical creases, and I will take it in just a bit to accommodate that.

The side:

Jeremy is a bit heavy around the waist, and I was surprised that there was no pulling or twisting. I had considered giving him a bit of extra room right around the waist, but by not doing it, it seems to disguise without seeming lumpy. What say you all?

I welcome any comments or suggestions.

Dawn: Thread and Buttons

Marji asked me to post this here too.

There is a bit of topstitching on this coat and I know that the look of the topstitching will really make or break the coat. I have used my sample to sew several lines of topstitching to see what I liked the most. ETA: I used a longer stitch length (3.5-4.0) and reduced the feed dog tension a bit. I used regular weight thread in the bobbin and it worked well after fiddling with the tension. I have found in the past it is better to have the same weight thread in the bobbin. On this sample I was using a topstitching needle that was pretty large; 100/16.

I have narrowed it down to two but can't decide which is best. From left to right:

  • Gutterman topstitching thread in a medium brown (no spool shown). I like the thickness of this thread but it comes on little, tiny spools. Actually the spools aren't small but the thread is so thick there just isn't much thread on each spool. My local JoAnn's does not have a suitable purple in this style of thread. They have a grape Jell-o color and that is it in the purple arena. Totally not suitable for a dark eggplant wool. My personal motto is: either match the color perfectly or make it very different. Otherwise it looks like you just don't know what you are doing.
  • Gutterman upholstery thread in grey. I wouldn't use the grey but I just wanted to see how it looked. This is thick thread and it comes in greater quantity. This type of thread comes in very limited colors. I use it for topstitching all the time.
  • Gutterman Heavy-Duty thread. I have never used this type of thread but it is the perfect color for my coat. It is 100% polyester. It is thicker than the regular, all-purpose sewing thread but not as thick as the topstiching or upholstery thread. It doesn't seem to be as shiny as the upholstery thread either. I made two rows of stitches to play with my tension.
  • Gutterman Upholstery thread again in a dark brown. This is the thread I used to topstitch my BWOF Alaska coat. It actually goes very nicely with the wool too.

Now I just have to decide between the purple and the brown.

Here you can see the buttons I plan to use and you can see the topstitchng in more detail. The flash makes everything much lighter than it actually is. The buttons are very dark brown, almost black. You can see in this picture how much thicker the real topstitching thread (brown on bottom) is. The purple fades into the fabric.


Here is the coat agin so you can see the amount of topstitching. All the major seams are topstitched. I love topstitching. I think it makes things looks so RTW.


I am debating whether to do bound buttonholes. I have never done them before.

Marji: Remember your buttons and threads

As I'm button shopping it occurs to me that we haven't really covered this under assembling your supplies, but you're going to need your buttons come mid-July for making bound buttonholes.

Then, I was doing a very weak effort at gazing at a couple of blogs on my blogroll - I'm so hopelessly behind - when I saw that Dawn put up a post about testing threads for topstitching.
This would be a good time to be looking for the thread you want to use too. Especially if you're making pockets that require a flap that will be topstitched.

Taunton Press article on threads and uses

Thread sources:
Gutterman makes topstitching thread, and at least around here it's available at the chain stores - Joanns. Altlanta Thread actually has some silk buttonhole twist.

Red Rock Threads YLI jeans stitch topstitching thread is one that is sold locally here and I like it and have used it

Silk Things, source for TIRE silk thread: If I remember correctly this is Kathryn's go-to thread.

Mettler makes a 30 weight Cordonnet topstitching thread. I'm not sure about sources to buy it at retail.

_____________________

And as long as I'm posting about buttons,
I'll shamelessly use this forum to ask if anyone sees
these in their travels to call me. Email me.
Stand on a roof and wave your arms at me.
They're a discontinued LaMode button, and come from old stock in a local store. They don't have close to enough. I had a card with the stock number on it, however, have seemingly misplaced it at the moment. The colors on the monitor are off, but the match is really good IRL.

Paco suggested I could cover buttons, and that's a possibility. And I've got generous volunteers out all over the country scouting buttons for me. But these have sort of nabbed my attention.
I'll need 10 buttons that are 5/8" - 3/4" and another 6 buttons that are 1/2" to 5/8" in size.

Thanks ;)

NancyK: Pattern adjustment for an erect back

Marji asked me to write a post on how to make an erect upper back adjustment.
An erect back has too much length in the cb seam line causing the neck to ride up above the neckline. I draw a line perpendicular to the grain line in the upper back. If you are doing this on a shoulder princess as this pattern is, you need to overlap the seam lines and make the adjustment across both ending at the seam line in the armscye . Cut into the back from the cb across to the arm seam line. If you are making this on an armhole princess, make the adjustment above the princess seam. Move up the bottom piece to the point you need to reduce the cb. The cb needs to be straightened, lining up the seam line above and below the center back. I take out about 7/8 " but, obviously, everyone is different. The erect back also means that there is often too much horizontal room too. The second part of this adjustment is the L shaped line that I drew on the pattern. This would be cut leaving it attached at the shoulder and moved in the amount needed which is determined by pinning out the folds that form near the armhole.